You may get a warning about your server (the router) having an invalid certificate and your browser will demand further confirmation or exception before allowing access. The Unifi Security Gateway has the incoming fibre from a Draytek Vigor 130 modem, which i've had for a while and it replaced the original Openreach one which always seemed to be buggy. The possibilities are for retransmission are off for both DS and US, on for DS and off for US, and on for both DS and US. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. I have achieved comparable speeds and stability from using Billion 8800NL and 8800NL/R2 routers configured in modem only bridge mode (and wireless disabled).

Draytek Vigor 130 - Anything better? - Plusnet Community Draytek Vigor 130 - Anything better? - Plusnet Community

This firmware is designated ' critical' (see below) so you should update your product and those of your clients (or let them know) as soon as possible. The settings on the Vigor 130 are correct for most UK lines out of the box, so in most cases it should only be necessary to configure the router that it is connected to. Each DrayTek modem offers BT Superfast Fibre and ADSL as standard, and we also have two designs to suit your business requirement of either one or two LAN ports. This ensures that you have the latest features, improvements but also security improvements to help product security in a continuously evolving threat landscape.The Vigor 130 has a single LAN port, and by enabling bridge mode, the modem itself is no longer accessible. Ensure you select "Enable" using the radio button from the top left corner to enable the PPPoE connection type. fast, VDSL and ADSL modem equipped router models, as well as the dedicated Vigor 130 and Vigor 166 modems. I like my vmg 8324 in bridge mode, no issues with stats etc but I should try a 130 really just to compare as I am on eci too. For whatever reason, it looks like the DLM has applied a banded profile capping the downstream speed at 74Mb.

Vigor 130 - Using VLAN tag on Router instead of Modem - DrayTek Vigor 130 - Using VLAN tag on Router instead of Modem - DrayTek

In most cases, the Vigor 130 needsnosetup or configuration - just plug it in and set up your PC or router. Quote from: vic0239 on April 15, 2017, 06:39:08 PM I had the same difficulty when I was the brief owner of two Vigor 130 devices and found the following explanation on the (login required) DrayTek web site. At WAN IP Network Settings, select Specify an IP address, enter an IP Address in the same IP subnet as Vigor130, and enter the LAN IP of Vigor130 for Gateway IP Address. NFEC This parameter reports the actual Reed-Solomon codeword size in bytes used in the latency path in which the bearer channel is transported. Assign an IP address from the same subnet as the modem to the WAN port ( eth8) of the UDMP using the following command (if you adjusted the IP address of your modem, change the IP addresses in the below commands as appropriate): ip address add 192.Virgin have a 1Gb option with their cable services in my town at the moment, however they are just so unreliable its not worth the risk at the moment. When connected to a router, the router itself is responsible for making the connection and the modem passes through the WAN IP. When the DSL LED is lit solidly, the Vigor 130 has established the link to the DSL line and can be used for bridging. So that the UDMP knows how to communicate with the modem, the next stage is to configure a static route.

Vigor 130 Modem in Bridge Mode on a Unifi Accessing a DrayTek Vigor 130 Modem in Bridge Mode on a Unifi

ATU-C and ATU-R are perfectly understandable but what is the meaning of "Near End" and "Far End" under the ATU-R heading? As well as all the benefits of the Vigor 130, the Vigor 166 also offers BT Ultrafast Fibre and an additional LAN port. I suggested in post number 13 that they need to concentrate in sorting that issue first then worry about connecting the router afterwards. By providing a PPPoE bridge, the connected device (firewall, router or PC) can log into the Internet (your ISP) directly and have full control over the Internet connection - that makes the Vigor 130 a unique product.Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults. INTLVBLOCK This parameter reports the actual block length of the interleaver used in the latency path in which the bearer channel is transported. Now go to [Internet Access] > [MPoA / Static or Dynamic IP] and enable the MPoA (RFC1483/2684) interface.

DrayTek V130-K ADSL2+/VDSL2 Ethernet Modem FTTC/BT Infinity

If you use DrayTek's ACS-SI management platform, you can use that to roll out the new firmware to all products en-masse.

I had the same problem, identical down to the 73999 sync speed, except, the cab I'm connected to is a Huawei. LSYMB This parameter reports the actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. Modems connect to the internet directly, translating code and messages, but cannot create a local connection. RST file will upgrade firmwareand wipe out all settings back to factory defaults so always use the .