Mounting– symmetrical relative to the centreline of the vehicle, even if Vicroads have poor wording. Rules clear here too. LED lights are popular because they’re relatively cheap, provide a nice, white light, are small and easy to mount relative to conventional driving lights. And they look cool. LED bars are not a subsitute for spotlights because there’s just not enough room to design a reflector which can throw light a reasonable distance, so instead they’re best used as short-range fill lights for manouvering, low-range driving, recovery or working.

STEDI Number Plate Mounting Bracket

I can’t see any problems with lights mounted on the roof, or having more lights than allowed as long as they aren’t used on the road. The only reason in my mind that lights mounted on the roof could be an issue is that they raise the clearance of the vehicle, and the car may not be able to fit into a standard garage, or car park, but as long as the driver knows the height, then he/she can avoid attempting to park where the clearance prevents. The first principle of vehicle modifications in Australia is that the answer is always state-specific. Sadly, each part of Australia has its own road authority, which has a slightly different set of rules so what’s legal in one state may not be legal in another. Because, well, who knows. We just have to live with the pain.The light or lights must not be fitted or be used in any way that is likely to dazzle another road user and must be installed in a way that the light produced does not cause the driver of the vehicle discomfort either directly or by reflection. The driving lights may be fitted with an isolator switch to allow high beam to be switched on without the driving lights also being switched on. Switching– driving lights only able to be switched on with full beam, and full beam must be operable without the driving lights. That seems to be safest and is what most people do anyway.

OSRAM LEDriving LED Light Bar License / Number Plate Mounting

If the lights are not fitted as pairs, they must be fitted symmetrically about the centre line of the vehicle. I’m in Victoria, and have a Jeep Grand Cherokee Overland with a bullbar, which has a pair of HID spotties in the middle above the winch. Considering the roof mounted lights, I see a lot of 4×4’s with roof mounted lights, both spotties and light bars. does not cause the driver of the vehicle discomfort, either directly or by reflection while in the normal driving position. style>