Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen. This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Polar Wash is a safe and effective cleaner applied after using Polar Blast to remove excess dirt, traffic film and grime from your paintwork. Polar Blast is a snow foam that can be applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo if the vehicle isn't heavily soiled, just ensure you rinse the vehicle with water first to remove the top layer of dirt.We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork. div>

If you're looking for even more variety and an abundance of different flavours and scents for a similar cost, Chemical Guys offer some really good products, but you'll easily become overwhelmed by the options if you're not careful. READ NEXT: If the thought of adding a ceramic coating to your car scares you, or you want that deep shine traditional waxes offer, Autoglym has you covered. For the ultimate shine, our top choice is Autoglym Ultra High Definition Wax. It'll give your car a mirror-like finish thanks to the use of refined carnauba wax and comes with a handy applicator and buffing towel. Alternatively, there's Rapid Aqua Wax, a budget carnauba wax that can be applied to all exterior surfaces, including glass and rubber. It is a coating designed specifically for use in a pressure washer. It is the coating element (third and final stage) of the three-stage Polar range process. It is preceded by the prewash – Polar Blast and shampoo - Polar Wash.

\n\t\t\tAutoglym Polar Kit

The Polar Blaster has been designed and tested to be used specifically with the three Autoglym Polar products. It will enhance their foam levels, dwell time and coverage. Polar Seal: Specially formulated pH neutral product for application through a pressure washer and a foam gun. Leaving a hydrophobic layer on your paintwork, water will then bead on the surface and reduce the time it takes to dry the car. Polar Seal can be applied to a clean, wet vehicle (avoiding the windscreen). Once coated, rinse off and dry to a high gloss finish. In summary the product has been developed to work neat through to 1part Polar Blast to 10 parts water. We have been very happy with the product performance diluted at 1:5. The Polar Blaster is a foam cannon that can be attached to domestic pressure washes to enhance the foam levels and user experience of the three products in the Autoglym Polar range. It fixes to the lance and comes with a bottle reservoir that contains the dilute product, negating the need to place a fill pipe in the product bottle.

If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. Polar Wash: Providing a safe and effective cleaner for application via a pressure washer and foam gun. Enabling you to cover your vehicle in a blanket of foam which eats away at dirt, traffic film and grime. We would only recommend its use in place of a shampoo if your paintwork has very light soiling. In these circumstances please ensure you rinse the vehicle first to remove any heavier contamination. We would not recommend agitation as part of a pre-wash process. Allow the product to dwell on the paintwork for up to 10 minutes. This will allow Polar Blast to safely soften and loosen soiling, before rinsing with your pressure washer. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.No. The Polar Blaster has been developed for use with pressure washers only, a hose will not have the required pressure or the right connector. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. There is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on.