3 Pcs Router Templates for Woodworking Large Charcuterie Board Handle Template Cutting Board Template Clear Acrylic Templates Angled Curvy Tracing Stencils Guide Tools for Kitchen Cutting Board Handle

Product Information

ROUTING THE RECESS. After selecting a template for your design, start by positioning the template on the workpiece and securing it with double-sided tape. Then, with the sleeve on the bushing, simply rout the outline of the recess and the remainder of the waste by following the template. If necessary, square up the corners with a chisel.

Often mistakenly called a flush trim bit, a pattern bit has the bearing on the shank of the bit instead of at the tip. This allows you to secure a template on top of a workpiece and clamp them both to your bench to rout the shape. And pattern-style bits aren't limited to straight cutters. The bowl-routing bit shown below is simply a different profile with a bearing on the shank to follow a template.The thing to keep in mind when using a guide bushing is that it will create an offset between the template and the workpiece. This means you'll need to account for the distance from the edge of the bushing to the cutting edge of the bit in your template design. The reason I prefer MDF is that it's perfectly flat and very easy to shape with files and sandpaper. The template I use for making curved rails for cabinet doors shown in the photo above is a good example. To make it, I simply laid out the curve with a compass, cut out the shape at the band saw, and smoothed the curve, first with a file and then with a simple, shop-made sanding strip, seen below. It's hard to overestimate the value of a router in the workshop. Often, the tasks you can perform in seconds with a router would take much longer with any other tool. And one way to get the most out of your router is to use it for making perfect duplicate or mating parts for a project. Usually this involves working with a template. Creating an interesting edge on tables, cabinet sides or other projects is easy to do with a jigsaw or bandsaw, but you’ll be left with saw marks to sand off. By cutting the shape close to the final size, and then using a template and a router to finish the job you get a consistent, smooth edge, which requires little additional work.

This same combination works in a router table as well. Only at the router table, you can have the template on top of the workpiece instead of below. A good example of this is routing matching top rails for "tombstone" cabinet doors.

Frequently Asked Questions

Infinity Cutting Tools makes it easy for you to create your own signs, inlays, and accents. We offer a wide range of accessories for signmaking and creating your own wood inlays.