Rust-Oleum White Scratch-Proof Floor Paint in Matt Finish - Chalk White 2.5L

Product Information

Coverage: Up to 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface.

This will depend on a number of factors including how well the floorboards were prepped, what paint was used and how much traffic the floor can expect. But a rough estimation is around two years. Finally, adding an extra coat of your chosen paint or a clear matt varnish can give your floorboard paint a longer life. What's the Best Floor Paint? Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance. Now vacuum the floor to get rid of as much dust and debris as possible. The final part of the prep is to clean the floorboards. Use a mop and liquid detergent (as instructed). Then rinse with the mop and clean warm water and leave to dry for at least 24 hours. Use a primer or specialist paint to cover any knots or stains. While a small hand sander or orbital sander can be useful for preparation, if you have a large space with previously painted or stained floorboards, you'll likely need to hire a drum sander for sanding floorboards properly.Drying Time: Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours. We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items

Obviously, a floor that is well prepped and painted and has low traffic will last longer. And even after a couple of years you are unlikely to need to repaint the whole floor, just the areas that get a lot of use. A Drying Time: Touch dry in 2 hours. Apply a second coat after 2 hoursif necessary. Hard dry in 4 hours, full hardness achieved after 7 days. Application: Stir thoroughly prior to use. The product may be appliedby brush or medium pile roller.Application: Apply when temperature is between 10 and 30ºC. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats are recommended. A luxurious durable matt finish for interior walls and ceilings.Class 1 scrub rated for easy cleaning. Scuff and stain resistant. Coverage: Up to 12m²/l per coat. Coverage may vary depending uponmethod and rate of application and porosity of surface. One simple way to extend the lifespan of your painted floor is to make sure that the floorboards are prepped properly. The more time spent on this part of the process the better the end product will be. Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary refresh.

The Rust-Oleum Chalky Finish Floor Paint is water-based with virtually no odour and give an extremely durable smooth matt finish.Coverage: Up to 12 - 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface. Application: Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a nap mohair roller. To create a distressed look apply two coats in contrasting colours. Allow to dry then lightly abrade with moistened sand paper or a stainless steel scouring pad - abrade with the grain of the wood. Protect the effect with Rust-Oleum Furniture Finishing Wax.