Drayton 123042 Digistat +3RF & Receiver, White

Product Information

If the valve is a 15, 10 or 8mm angled body then it can be fitted in either flow/return, horizontally or vertically. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly. In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts.

Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. No, E1 is an error code that means the internal sensor has failed. The sender unit will have to be replaced. I have a Digistat RF and I have managed to snap one of the clips on the battery holder. Where can I obtain a replacementNo, The Digistat+2 has superior programming functions, which allow for greater temperature control. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming The Drayton Digistat+3RF is a thermostat that is designed to provide efficient control of heating systems in residential and commercial settings. It is specifically designed for use in the United States (en_US). What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement?

When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat). The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Digistat supports the following fuel types: Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical?

Digistat+3 RF

The RF1, 2 and 3 are no longer available. They can be replaced with any current range of RF thermostats. Hard Wired Room Thermostats To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature. Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners?

day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money.day programming: The most flexible option allowing you to schedule every day of the week independently. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event.

In terms of compatibility, the Digistat+3RF can be used with a variety of heating systems, including gas, oil, and electric. It is also compatible with both combi boilers and zone valve systems. Such flexibility makes it suitable for a wide range of applications in various types of buildings. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor.The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body. The actuator head of a ACL Lifestyle 2-port motorised valve (679H308-30L1) has failed. Is it still possible to get the actuator for this valve to avoid draining the whole system? To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open.