ROCKBROS Suction Bike Rack Car Roof Bike Rack Bicycle Carriers for Cars Roof Bike Carriers Roof Mounted Bike Rack Quick Release Aluminium Alloy Bicycle Holder with Sucker

Product Information

VACUUM MOUNTED TECHNOLOGY: IMT vacuum mount bike carrier system uses a 10-inch suction cup for the fork mount and a 6-inch cup for rear wheel. Each suction cup uses durable UV and weather resistant concave rubber pad so that they can be attached to flat and cured surfaces

Also, the suction cup of the vacuum pump ensures a firm frame. As for the crank, it’s fixed with high-strength Velcro. This plays a vital role in preventing the pedal from scratching the top of your vehicle. Before you use it, make sure the cup is squeaky clean and free from any debris. If it’s not, simply clean it in warm soapy water and they dry gently with a lint-free cloth. Don’t worry about the vacuum loose, the 10” suction cup has powerful suction that can hold up to 48 hours if fully sealed. The red-Line Indicator warns user of any vacuum loss. When it shows less than 100% vacuum left, simply pump the plunger until you reach the original vacuum pressure without removing the cup. With six suction cups each with 210lbs pull strength, you can be confident your bikes aren’t coming off CourtesyMounting the Kupper Mounts Bike Carrier was straightforward. Clean the attachment points on the vehicle with a wet, soapy rag, and do the same for the cups if required. Moisten the cups and pump until the suction indicator no longer shows. First-time use requires measuring the spacing between the front fork and rear wheel and then repeating the pumping process for the smaller rear-wheel holder. A: Yes; the clamps that hold the vacuum mounts to the cross bars can be loosened and moved to a new position. Don’t forget to retighten them! The tool you need for this comes in the box (you’re welcome). Learn a little more about the Monkey Bars here. Now, you may ask, wouldn’t the cup slide? As a matter of fact, no. the cup doesn’t slide because the friction created by both the cup and surface keeps it from sliding. But to work like this, you have to take care of few things first. Don’t get disheartened. They’re not tedious at all. At an unmounted 9-inch diameter for the front suction cup and 6-inch diameter for the rear, Kupper Mounts uses “bigger is better” logic to create enough vacuum and surface area on the vehicle to quell concerns.

To take the guessing game out of the equation, they have included an indicator in the mix. This thing will tell you if you need to re-pump again. A gentle reminder: If you want to enhance the suction power, you can rub a tiny dab of Vaseline or cooking oil on the rim of the cup. This procedure works like a charm. They’ll survive for months before you need to run maintenance on them. Believe me. The adhesive does a wonderful job of keeping things together. Add our telescoping loading bars for easier loading and wider carrying ability. Up to 20″ of added width on each side with loading bars fully extended. Loading bars extend and adjust to various widths to fit many requirements.This warranty is given in lieu of all other written or oral warranties, express or implied, including without limitation implied warranties of merchantability and fitness for a particular purpose, and are limited to the duration and specifications of this warranty. Just in case if you’re still worried about lifting your bike onto the roof, you can stop worrying now. This system can be used on the rear of an SUV too. All you have to do is simply place the front wheel mount near the top of your rear windscreen and the rear wheel mount at the bottom of your trunk. Initially, I expected it wouldn’t work well with two mountain bikes or any flat bar bike. Mountain bike handlebars appear too wide for the 37cm / 14.5in fork mount spacing. This technology we use to assemble our list depends on a variety of factors, including but not limited to the following: Don’t forget to clean the surface too. If it’s dirty or has any dust on it, the suction cup will not adhere to it properly.

If you don’t know what ABS plastic is, let me debrief you. This sort of plastic offers a delicate balance of impact, heat, chemical and abrasion resistance, dimensional stability, tensile strength, surface hardness, and more. It remains rigid and sturdy even at significantly low temperatures. First things first, the build. Kupper Mounts is made to last. It’s made from super-tough steel that makes it durable. It can withstand demanding conditions as well. Also, plastics don’t feel cheap at all. They are weather-resistant ABS plastic. Typical rooftop and hitch-mounted bicycle carriers are a large investment. Drivers usually leave them in place, which affects mileage, creates noise at highway speeds, and generally detracts from the aesthetics of the car. Let me just elaborate a little bit. When you press a suction cup against your car’s surface, you push out the air inside it. It eliminates the pressure inside the suction cup and creates a vacuum. This vacuum seals the cup tightly and firmly holds on to the surface. When you’re pumping it, simply keep pumping the plunger until you reach the original vacuum pressure without removing the cup. Mount your bikes after that, and you’re good to go.Reliability and longevity are two sides of the same coin. If it is sturdy and durable, you can use it for a long period in the months ahead. We first used our algorithms to gather information from dependable sources about available products. it’s been manufacturing professional vacuum suction tools for about 30 years. They’ve really excelled in this area because of their dedication to producing top-notch products that’ll make their customer’s life easier.

Before each use, clean the vacuum cups with a sponge or soft cloth. Clean them with mild dish soap and water. So, how to install it? Well, it’s easy. Wipe your roof carefully. There should be no dust or water on the surface. Position the cup on the part with higher sheet strength. After that, gently press the suction cup downwards using the piston rod until there’s no force to rebound. Normally, Talon will carry one bike only amd maximum load capacity is 45 pounds. However, people can use the other models for carrying two or three bikes. For instance, you can use Mini-Bomber to carry two bikes and the Bomber to carry three. But what if you own convertibles? Well, in that case, you can resort to KOMODO!Not every item is chosen at random. Several factors are taken into account before we settle on a finalized list. The following are some of the factors we consider: Brand Value Protect Car Paint】Rubber suction cups can prevent your car paint and sheet metal from being damaged, Velcro straps are used to fix the cranks, once again reinforced the stability of the bike, you can take the bike for road trips or camping with confidence and let the bike travel become reality.