About this deal
If you have water running into the toilet pan continuously and are not sure if you need to purchase a spare part / replace the flush valve or inlet/fill valve you can try this simple test to determine.
Registered address: National Shower Spares Ltd, Units 16-17 Bamel Way, Gloucester Business Park, Brockworth, Gloucester, Gloucestershire, GL3 4BH.We advise purchasing a couple of these washers at a time so you've got one readily available in the event that the washer fails again in future. The Ideal Standard dual flush valve seal and clip (SV01967) is a genuine, brand new Ideal Standard product, covered by a minimum 1 year Ideal Standard manufacturer's guarantee. New part fitted in less than 5 minutes, and all i needed was a flat head screwdriver to pop the old on out. Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require. If your Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed.
I cut off the old ring using a fine junior hacksaw because I couldn't easily prise out the clip tangs with a screwdriver.
The Ideal Standard SV01967 Dual Flush Valve Seal is a genuine Ideal Standard product, covered by a manufacturer's guarantee. With the Armitage Shanks SV flush valve range there is no need to remove the entire cistern to service or replace the valve. The flush valve in my toilet wasn’t making a proper seal so water from the cistern was constantly running into the pan. Whatever problem you may have, Ideal Standards will have a solution for you that will consider every element.