Please don’t be alarmed if there is any slight colour enhancement on your slabs as this will disappear after a few weeks. I've used joint-it simple on numerous patio's now from sandstone to limestone to porcelain and I find it a fantastic product.

A quick application of Joint-It So Clean will keep your patio looking refreshed, clean and tidy – removing any lichen, moss and algae that may have settled in shaded areas. Lower temperatures will result in slower hardening and higher temperatures will result in quicker hardening.To get the best results when using Joint-It Simple with Porcelain, we recommend that you keep both the top of the stone paving and the Joint-It Simple product saturated with clean water to make Joint-It Simple flow into the Porcelain joints more easily. We strongly recommend that you watch our application video before you start the foundations for your paving. To get the best results from Joint-It Simple, joints must be a minimum width of 3mm and a depth of 25mm for the joint to have stability when it is set.

The Joint-It simple paving jointing compound is an ideal sealant and toolset for residential and commercial use.Very helpful staff, sent me photos of 3 different tiles together and measured the exact tile size so that I could make my decision and advised me on the best colour grouting. As you can see from the illustration below, there is not enough surface area at the bottom of the V joint to hold Joint-It Simple in place. Effortlessly lay down this sweep-in Joint-It Simple paving grout quicker and easier than most other jointing compounds. If you have any product leftover after use, just put it back in the bucket and cover with clean water.